Your laundry room, basement, and roof are almost as likely to have water damage and leaks as your bathrooms and your kitchen are. So, what can you do about it?
Check your washing machine hoses often for moisture around the ends of the hose and signs of cracking or weak spots. The hose should be replaced as often as is necessary, but this shouldn’t be more than every three to five years.
The water heater in your home can pose problems, as well. If there are areas of rust on the tank or wet areas in the floor nearby, you might have a leak on your hands. Hot water heaters should be located in the lowest level of your home possible, preferably the basement, and always next to a floor drain. If it has to be installed on upper floors, it should be installed inside a large drain pan and the water directed to a drain in the floor. This way, if it begins leaking, it won’t damage your floors or any area of your home on the next floor down.
Your air conditioner collects condensation and each one should have a drain pan line to direct the water collected by your air conditioner.
Outside your home, any low spots around your house’s foundation should be filled in so that water drains away from the house and not toward it and end up seeping in through any flaws in the structure. Caulking around windows and doors should be inspected; if it is cracked or missing anywhere, it’s best to remove it and completely re-caulk it.
The area round your roof should be draining properly and if it’s not, water seeps into the wood and causes it to rot. A leaky roof can be a definite cause of water damage and is another thing that is not uncommon. Keep your gutters and downspouts free from leaves and other debris that can prevent the water from leaving the roof efficiently. Don’t walk on your roof unless you have to for repairs and it could be wise to invest in a roof preservative to help limit the amount of water your roof sponges up. Wood soaks up water pretty easily and if you want to prevent water damage to your home, it’s a good idea to get a sealant for wooden areas of your home that are exposed to the elements.
Showing posts with label damage. Show all posts
Showing posts with label damage. Show all posts
Friday, January 18, 2008
Water Damage and Your Homeowner’s Insurance
Not surprisingly, water damage is one of the most frequent causes of home insurance claims. Not many people like having to discover what is and what isn’t covered by their home insurance policy, but that’s often the way that it goes. A pipe bursts in the basement or an appliance such as a clothes washer or dishwasher begins to leak all over the floor while you’re gone on vacation and all of a sudden you find yourself wondering if you’re covered.
For example, if a pipe were to burst in the home due to a drop in temperature and you had left the home vacant and without the heat necessary to keep the pipes from bursting, you might not be covered. They could possibly deny you due to the fact that you did not take the necessary action that would have prevented the event.
If your bathtub overflows, you should be covered, even if it’s just because you were on the phone or tending to another matter in the house and simply forgot to turn off the water.
In most cases if a major household appliance such as a washer or a dishwasher suddenly malfunctions and water spews all over the floor and causes damage, you are covered by your homeowner’s insurance. You’ll have to pay for the cost of fixing the washing machine or dishwasher yourself, but any damage caused by the water itself should be paid for by your policy.
If the cause of the damage is heavy rain and the water leaks through the roof or floods into the basement and the house itself and items inside it are damaged, you should be covered for the cost of the water damage to the interior of your home. The damage to the belongings inside your home is probably not covered, however; if the roof leak was caused by a tree limb falling on the house, then the damage to your furniture, roof, and interior should be covered to a reasonable extent.
One of the major causes of water damage to homes, however, is usually not covered. This is a flood. Unless you have an insurance policy that specifically identifies a flood as a source of damage to the home, you aren’t covered. Flood insurance needs to be purchased from the federal government and your local community should be able to give you information as to whether or not they participate in the National Flood Insurance Program.
For example, if a pipe were to burst in the home due to a drop in temperature and you had left the home vacant and without the heat necessary to keep the pipes from bursting, you might not be covered. They could possibly deny you due to the fact that you did not take the necessary action that would have prevented the event.
If your bathtub overflows, you should be covered, even if it’s just because you were on the phone or tending to another matter in the house and simply forgot to turn off the water.
In most cases if a major household appliance such as a washer or a dishwasher suddenly malfunctions and water spews all over the floor and causes damage, you are covered by your homeowner’s insurance. You’ll have to pay for the cost of fixing the washing machine or dishwasher yourself, but any damage caused by the water itself should be paid for by your policy.
If the cause of the damage is heavy rain and the water leaks through the roof or floods into the basement and the house itself and items inside it are damaged, you should be covered for the cost of the water damage to the interior of your home. The damage to the belongings inside your home is probably not covered, however; if the roof leak was caused by a tree limb falling on the house, then the damage to your furniture, roof, and interior should be covered to a reasonable extent.
One of the major causes of water damage to homes, however, is usually not covered. This is a flood. Unless you have an insurance policy that specifically identifies a flood as a source of damage to the home, you aren’t covered. Flood insurance needs to be purchased from the federal government and your local community should be able to give you information as to whether or not they participate in the National Flood Insurance Program.
Drying Out Water Damaged Properties
As you can imagine, drying out a home or other building that’s been submerged in water, whether it’s flood water or rain water, can be quite a daunting task. Here we’ll discuss a few different ways to begin the process.
A flood can happen in almost an instant, but drying out a home or other property can take a long time. Depending on the property you’re trying to dry out, using hot air drying techniques may damage the building, especially if it’s a historical one.
Before beginning the drying process, be sure to address the electrical hazard. Make sure all power to your home is completely off. Just because the power is off for all your neighbors, don’t assume that yours is off, too. This could be a very fatal mistake. Not only should you be careful of electrical hazards, but biological ones, as well. Flood waters such as those caused by Hurricane Katrina can be contaminated with human and animal waste, all manner of chemicals, and even cadavers. Protect your eyes, mouth, hands, and wear a respirator. Wash your hands in disinfectant soap after a session of cleaning and again before you eat.
Take pictures of the damage with a camera or if possible, videotape them. This documentation will make it easier when you begin negotiating with your insurance adjuster on what compensation you will be eligible for.
Make any repairs necessary to keep water from re-entering the home. These repairs should only be temporary while you get the majority of the building dried.
Any effort to begin drying out a home is the attic. Any wet insulation should be removed as quickly as possible; it is no longer useful, but it is heavy and holds moisture for quite a long time and will continue to cause damage to wood, metal, and drywall. If anything in the attic is soaked with water, remove it. These waterlogged items are heavy and can cause the ceilings to crack. Fresh air circulating through your home is a good way to begin and if you have any fans, turn them on once you’re confident that you can’t become electrocuted simply by walking around.
Opening the windows throughout the house (as long as it isn’t raining) will help and at this time you should begin to wash down any wooden items in the home in order to remove mud, silt, and other debris.
A flood can happen in almost an instant, but drying out a home or other property can take a long time. Depending on the property you’re trying to dry out, using hot air drying techniques may damage the building, especially if it’s a historical one.
Before beginning the drying process, be sure to address the electrical hazard. Make sure all power to your home is completely off. Just because the power is off for all your neighbors, don’t assume that yours is off, too. This could be a very fatal mistake. Not only should you be careful of electrical hazards, but biological ones, as well. Flood waters such as those caused by Hurricane Katrina can be contaminated with human and animal waste, all manner of chemicals, and even cadavers. Protect your eyes, mouth, hands, and wear a respirator. Wash your hands in disinfectant soap after a session of cleaning and again before you eat.
Take pictures of the damage with a camera or if possible, videotape them. This documentation will make it easier when you begin negotiating with your insurance adjuster on what compensation you will be eligible for.
Make any repairs necessary to keep water from re-entering the home. These repairs should only be temporary while you get the majority of the building dried.
Any effort to begin drying out a home is the attic. Any wet insulation should be removed as quickly as possible; it is no longer useful, but it is heavy and holds moisture for quite a long time and will continue to cause damage to wood, metal, and drywall. If anything in the attic is soaked with water, remove it. These waterlogged items are heavy and can cause the ceilings to crack. Fresh air circulating through your home is a good way to begin and if you have any fans, turn them on once you’re confident that you can’t become electrocuted simply by walking around.
Opening the windows throughout the house (as long as it isn’t raining) will help and at this time you should begin to wash down any wooden items in the home in order to remove mud, silt, and other debris.
Protect Your Water Pipes in the Winter
People who are spending their first winter in their new home and have never owned a home before might not think about the kind of damage a burst water pipe can cause. New homeowners don’t often think about this very real problem and it can lead to some very expensive consequences.
Water pipes in the home that are not properly insulated can freeze and burst in the winter if the temperature drops to below 20 degrees. Even a crack that is only one-eighth of an inch can let out over 250 gallons of water each day and the water damage this can cause can potentially be catastrophic. Your floors, clothes, carpet, and personal items will be damaged and as the water dries up and spring returns, it will leave you with a more serious problem. This problem is mold and when water damage to your home isn’t repaired correctly or not repaired at all, it can grow in your home and make your entire family become sick over time. While most insurance policies do not cover mold, water damage is usually covered to some extent. Preventing water damage to your home that is covered can help you prevent the mold damage to your home that isn’t covered and while any kind of water damage can cause this mold to grow, but burst frozen pipes are one of the easiest things to prevent.
One of the first things that you should do during the winter is cover your indoor water pipes with insulation. Where possible, make sure warm air can get to your pipes during a deep freeze. Do this either by opening the cabinets under your kitchen and bathroom sinks or placing a space heater in the room with these pipes. If you’re going to use space heaters, be careful and don’t leave them unattended for long or where they can possibly catch things on fire. Don’t use extension cords with space heaters and keep anything that could catch fire preferably over 5 feet away or you could be facing a fire damage problem instead of water.
Disconnect any garden hoses and make sure cracks in your home’s foundation are sealed so cold air, water, and snow can’t get inside to your pipes. Keeping a small bit of water running through hot and cold water faucets can also mean the difference between a busted and an un-busted pipe.
Water pipes in the home that are not properly insulated can freeze and burst in the winter if the temperature drops to below 20 degrees. Even a crack that is only one-eighth of an inch can let out over 250 gallons of water each day and the water damage this can cause can potentially be catastrophic. Your floors, clothes, carpet, and personal items will be damaged and as the water dries up and spring returns, it will leave you with a more serious problem. This problem is mold and when water damage to your home isn’t repaired correctly or not repaired at all, it can grow in your home and make your entire family become sick over time. While most insurance policies do not cover mold, water damage is usually covered to some extent. Preventing water damage to your home that is covered can help you prevent the mold damage to your home that isn’t covered and while any kind of water damage can cause this mold to grow, but burst frozen pipes are one of the easiest things to prevent.
One of the first things that you should do during the winter is cover your indoor water pipes with insulation. Where possible, make sure warm air can get to your pipes during a deep freeze. Do this either by opening the cabinets under your kitchen and bathroom sinks or placing a space heater in the room with these pipes. If you’re going to use space heaters, be careful and don’t leave them unattended for long or where they can possibly catch things on fire. Don’t use extension cords with space heaters and keep anything that could catch fire preferably over 5 feet away or you could be facing a fire damage problem instead of water.
Disconnect any garden hoses and make sure cracks in your home’s foundation are sealed so cold air, water, and snow can’t get inside to your pipes. Keeping a small bit of water running through hot and cold water faucets can also mean the difference between a busted and an un-busted pipe.
Mold in Your Apartment - Who is Liable?
If you move into an apartment or a home and you sign a lease, some people might think that they’re stuck with that lease even if they discover that the property has a substantial mold problem. This is not true.
No matter who you’re renting from or what kind of property, it is the landlord’s responsibility to provide you with a healthy place to live. If you or your children become sick due to the mold located in the home, apartment, or business you are leasing, your landlord can be held responsible.
The only thing that you have to do first is prove that mold exists in your rented space. That burden or proof is on you because in most leases, mold testing, inspections, and removal are not covered by the landlord. Landlords do not pay for these; you do. If there is a problem, you have to prove it.
If the rental property is infested with mold, the landlord might be liable for the damage to the tenant’s health, the medical bills associated with mold, loss of income due to sickness, and for the damage to clothing and other possessions. Other possible liabilities include the expense it takes to move to a mold-free environment, the difference between the rent at the mold-infested rental and the new, habitable rental, and for any mold inspections, testing, and remediation of the rental that were paid for by the tenant before moving out.
You should mail a notice to your landlord via certified mail that there is a mold problem first and foremost and provide proof within the envelope. An analysis and identification of the mold sample you collected using a mold test kit signed by a mold laboratory is a good way to prove that mold exists in the property. Even better than this is to have a written report signed by a certified mold inspector along with the above mentioned laboratory report. If notice is ignored by your landlord, you can choose to send a second notice stating that due to the failure to have the mold removed from the property, you are withholding your rent. Lastly, if that is ignored by your landlord, you should send another notice via certified mail that you are vacating the premises and that legal action is going to be taken, especially if you have suffered health complications due to the mold. You shouldn’t need a lawyer to draw up these notices for you, as long as you are clear and to the point that mold exists on the landlord’s property that you are renting and you want it removed and if you are suffering any health complications, these should be stated very clearly and with proof, as well. Most landlords will respond promptly.
No matter who you’re renting from or what kind of property, it is the landlord’s responsibility to provide you with a healthy place to live. If you or your children become sick due to the mold located in the home, apartment, or business you are leasing, your landlord can be held responsible.
The only thing that you have to do first is prove that mold exists in your rented space. That burden or proof is on you because in most leases, mold testing, inspections, and removal are not covered by the landlord. Landlords do not pay for these; you do. If there is a problem, you have to prove it.
If the rental property is infested with mold, the landlord might be liable for the damage to the tenant’s health, the medical bills associated with mold, loss of income due to sickness, and for the damage to clothing and other possessions. Other possible liabilities include the expense it takes to move to a mold-free environment, the difference between the rent at the mold-infested rental and the new, habitable rental, and for any mold inspections, testing, and remediation of the rental that were paid for by the tenant before moving out.
You should mail a notice to your landlord via certified mail that there is a mold problem first and foremost and provide proof within the envelope. An analysis and identification of the mold sample you collected using a mold test kit signed by a mold laboratory is a good way to prove that mold exists in the property. Even better than this is to have a written report signed by a certified mold inspector along with the above mentioned laboratory report. If notice is ignored by your landlord, you can choose to send a second notice stating that due to the failure to have the mold removed from the property, you are withholding your rent. Lastly, if that is ignored by your landlord, you should send another notice via certified mail that you are vacating the premises and that legal action is going to be taken, especially if you have suffered health complications due to the mold. You shouldn’t need a lawyer to draw up these notices for you, as long as you are clear and to the point that mold exists on the landlord’s property that you are renting and you want it removed and if you are suffering any health complications, these should be stated very clearly and with proof, as well. Most landlords will respond promptly.
Mold And Your New Home
Say that you’re having a new home built for you. Imagine your surprise when you discover after it’s done that it’s infested with mold! What a nightmare that would be! Most people don’t think about the possibility of mold actually being built into their homes when the contractor is in the process of building it. How can this happen?
Sometimes building materials that have mold on them are used in the house’s construction and the contractor and/or his supervisors don’t assess the quality of the materials before using them. The best thing you can do to prevent mold from being built into your new home are to inspect the building materials and test them yourself.
Sometimes the materials bought to build your home with are stored outside directly on the ground and in cases where it rains on them and the humidity is high, mold can and will begin to grow on these items, depending on how long they are left there. Both building materials and the entire home itself should be covered with plastic sheeting at the end of each day to make sure the part of the home that is already completed and the materials it is being built with are safe from rain. Until the walls and roof of the house are installed and are completely able to keep out rain and other kinds of precipitation, it should be covered each and every day of the construction.
The home sometimes isn’t tested for mold growth as it should and when it should be, which is during the home’s construction and after it is finished. Although some people choose to do mold testing during and after their new home’s construction on their own (as they should), it is the job of the contractor to make sure the integrity of the structure is not compromised by anything, including mold. You could sue the contractor if you discover the mold contamination after the home is already built, but who wants to build a home for thousands or even hundreds of thousands of dollars just to find out that you can’t live in it? Nobody I know of.
The modern materials that we use to build homes these days, including drywall and plywood, are things that mold love to eat. Most homes are built recently have some amount of these materials in them, though, and sometimes it can’t be helped unless you want a more expensive alternative.
Sometimes building materials that have mold on them are used in the house’s construction and the contractor and/or his supervisors don’t assess the quality of the materials before using them. The best thing you can do to prevent mold from being built into your new home are to inspect the building materials and test them yourself.
Sometimes the materials bought to build your home with are stored outside directly on the ground and in cases where it rains on them and the humidity is high, mold can and will begin to grow on these items, depending on how long they are left there. Both building materials and the entire home itself should be covered with plastic sheeting at the end of each day to make sure the part of the home that is already completed and the materials it is being built with are safe from rain. Until the walls and roof of the house are installed and are completely able to keep out rain and other kinds of precipitation, it should be covered each and every day of the construction.
The home sometimes isn’t tested for mold growth as it should and when it should be, which is during the home’s construction and after it is finished. Although some people choose to do mold testing during and after their new home’s construction on their own (as they should), it is the job of the contractor to make sure the integrity of the structure is not compromised by anything, including mold. You could sue the contractor if you discover the mold contamination after the home is already built, but who wants to build a home for thousands or even hundreds of thousands of dollars just to find out that you can’t live in it? Nobody I know of.
The modern materials that we use to build homes these days, including drywall and plywood, are things that mold love to eat. Most homes are built recently have some amount of these materials in them, though, and sometimes it can’t be helped unless you want a more expensive alternative.
Mold and Selling Real Estate
Selling a house contaminated with mold isn’t a pleasant thing to have to deal with. There are a few things that you can do, however, to make the selling of your mold-contaminated home as painless as possible.
Any real estate sales contract should have in it an environmental inspection clause that allows for a 2 week to a 3 week inspection period so the buyer can have a professional mold inspector view the property and test it for mold or any other kind of natural hazards that might occur in the home. If it’s obvious that mold exists in the home, the only testing you should need is to determine whether the mold is toxic or not. Even if the mold isn’t a hazard to your health, it could be a hazard to the home’s structural integrity. If you can have the mold removed from the home before you sell it, this is the best thing to do. Selling the home will be easier if the mold is already gone, although you can leave this up to the buyer if you want to sell the home for a little less.
The owner of a property being sold shouldn’t make any attempt to hide mold if the problem is known about. If the buyer of the home suspects that you were trying to hide the problem, they may back away from the house completely. After all, if you would deceive them about the mold, what else could you be deceiving them about?
You should have in writing what you have done to try and correct any problems with mold or other environmental hazards. Any past water or mold damage should be disclosed also in this writing and it should be added to the sales contract so the buyer of the home legally knows about it. In addition to this, the seller should include in the contract that the home is being sold as-is and that there is no kind of warranty on the property for any environmental reasons.
Lastly, you should ask for a clause that releases not only you, but the lender, and the real estate agent from any and all liability related to mold to the buyer. As long as the information that you have given in your report about the past water and mold damage to the home and what you have done to remove it is complete and accurate to the best of your knowledge, you should be on solid legal ground should any problems with the buyer arise later.
Any real estate sales contract should have in it an environmental inspection clause that allows for a 2 week to a 3 week inspection period so the buyer can have a professional mold inspector view the property and test it for mold or any other kind of natural hazards that might occur in the home. If it’s obvious that mold exists in the home, the only testing you should need is to determine whether the mold is toxic or not. Even if the mold isn’t a hazard to your health, it could be a hazard to the home’s structural integrity. If you can have the mold removed from the home before you sell it, this is the best thing to do. Selling the home will be easier if the mold is already gone, although you can leave this up to the buyer if you want to sell the home for a little less.
The owner of a property being sold shouldn’t make any attempt to hide mold if the problem is known about. If the buyer of the home suspects that you were trying to hide the problem, they may back away from the house completely. After all, if you would deceive them about the mold, what else could you be deceiving them about?
You should have in writing what you have done to try and correct any problems with mold or other environmental hazards. Any past water or mold damage should be disclosed also in this writing and it should be added to the sales contract so the buyer of the home legally knows about it. In addition to this, the seller should include in the contract that the home is being sold as-is and that there is no kind of warranty on the property for any environmental reasons.
Lastly, you should ask for a clause that releases not only you, but the lender, and the real estate agent from any and all liability related to mold to the buyer. As long as the information that you have given in your report about the past water and mold damage to the home and what you have done to remove it is complete and accurate to the best of your knowledge, you should be on solid legal ground should any problems with the buyer arise later.
Mold: A Few Words to Know
When talking about mold, there are a few words and phrases everyone needs to know the meaning of and here are the most important ones.
“Mold”. Mold is a kind of fungus (belonging to the kingdom fungi) that grows both indoors and outdoors all around the world and there are many different species and colors. To some people the words fungi and mold are used interchangeably, but not all fungi are molds. Other fungi besides molds include something that most of us eat all the time: mushrooms. Certain kinds of mold are also used in the creation of specific kinds of cheese, so it is incorrect to think that all molds are bad for us.
Most of us don’t know what “mycotoxin” means, but it is what makes some kinds of molds dangerous. Mycotoxins are a compound that are produced by fungus that are dangerous to living things. The mold itself is not toxic, but the mycotoxins produced by the mold are and these are what cause health complications for some people.
When mold inspectors talk to you about “remediation”, you might not understand exactly what that means. The word “remediation” means to solve a problem and when it comes to mold, this means fixing the moisture and heating problem in the building where there is a mold infestation.
Stachybotrys is a genus of mold that has about 10 members and this grows mainly on dead plant materials. When it’s found indoors, it often grows on things like paper and canvas (this includes sheetrock that has a paper covering). This kind of mold is toxic and it is the mold that most people are thinking of when they say “black mold”, even though a few different kinds of mold are black. Not all black mold is stachybotrys.
Hidden mold is found in areas that you cannot see readily. They are colonies that can be found inside walls or in ventilation systems like inside air conditioners or inside the ducts themselves. Hidden mold in your ventilation system is important to get rid of because it’s distributing the mold throughout your home or business and spreading the infection to other areas where it will likely take root and grow.
The word “biocide” is a term that is meant to denote chemicals that kill organisms such as fungi or at the very least, slow their growth. The word “fungicide” is often used interchangeably with “biocide”.
“Mold”. Mold is a kind of fungus (belonging to the kingdom fungi) that grows both indoors and outdoors all around the world and there are many different species and colors. To some people the words fungi and mold are used interchangeably, but not all fungi are molds. Other fungi besides molds include something that most of us eat all the time: mushrooms. Certain kinds of mold are also used in the creation of specific kinds of cheese, so it is incorrect to think that all molds are bad for us.
Most of us don’t know what “mycotoxin” means, but it is what makes some kinds of molds dangerous. Mycotoxins are a compound that are produced by fungus that are dangerous to living things. The mold itself is not toxic, but the mycotoxins produced by the mold are and these are what cause health complications for some people.
When mold inspectors talk to you about “remediation”, you might not understand exactly what that means. The word “remediation” means to solve a problem and when it comes to mold, this means fixing the moisture and heating problem in the building where there is a mold infestation.
Stachybotrys is a genus of mold that has about 10 members and this grows mainly on dead plant materials. When it’s found indoors, it often grows on things like paper and canvas (this includes sheetrock that has a paper covering). This kind of mold is toxic and it is the mold that most people are thinking of when they say “black mold”, even though a few different kinds of mold are black. Not all black mold is stachybotrys.
Hidden mold is found in areas that you cannot see readily. They are colonies that can be found inside walls or in ventilation systems like inside air conditioners or inside the ducts themselves. Hidden mold in your ventilation system is important to get rid of because it’s distributing the mold throughout your home or business and spreading the infection to other areas where it will likely take root and grow.
The word “biocide” is a term that is meant to denote chemicals that kill organisms such as fungi or at the very least, slow their growth. The word “fungicide” is often used interchangeably with “biocide”.
How to Prevent Water Damage Outside Your Home
Any excess amount of water coming into contact with the foundation or the inside of your home can be structurally damaging and if you own the home you’re currently living in, one of the best things that you can do to prevent this damage is to learn how to direct runoff water away from your home.
If you live in a rainy climate or even a snowy one (even snow melts eventually in most places), you should take special care to protect the structural integrity of your home. This is best done by making sure that you have good surface drainage outside of your home and this involves your roof, gutters, and downspouts. Downspout extensions also need to be paid attention to and you need to make sure that they direct water as far as possible from your home’s foundation.
Making sure your roof is properly angled according to where you live. Roofs with higher pitches are the most common in areas where snow tends to be heavy because snow can easily slide off the roof instead of being allowed to sit there and not only stress your roof because of the weight, but when it starts to melt, it will cause the water damage you’re trying to avoid. Water shouldn’t be allowed to accumulate on your roof for any period of time and this is why your roof should be angled so the water will run into the gutters.
The gutters to your home should be large enough to handle heavy amounts of rainfall, especially if you live in an area where heavy rain is common. They should also be cleaned out on a regular basis and be free of clogs of any kind. It might not be a fun home improvement activity for you or anyone you hire to do it for you, but doing this as opposed to having to repair water damage to your home will save you money in the long run.
The downspouts that are connected to your gutters are what direct the water from the gutters and down to the ground where a downspout extension should be located to make sure the water from your roof doesn’t collect around your foundation. These are normally located around the corners of the home, but can be found in other areas. The easier it is for water to get away from your home, the more money you’ll end up saving in the future.
If you live in a rainy climate or even a snowy one (even snow melts eventually in most places), you should take special care to protect the structural integrity of your home. This is best done by making sure that you have good surface drainage outside of your home and this involves your roof, gutters, and downspouts. Downspout extensions also need to be paid attention to and you need to make sure that they direct water as far as possible from your home’s foundation.
Making sure your roof is properly angled according to where you live. Roofs with higher pitches are the most common in areas where snow tends to be heavy because snow can easily slide off the roof instead of being allowed to sit there and not only stress your roof because of the weight, but when it starts to melt, it will cause the water damage you’re trying to avoid. Water shouldn’t be allowed to accumulate on your roof for any period of time and this is why your roof should be angled so the water will run into the gutters.
The gutters to your home should be large enough to handle heavy amounts of rainfall, especially if you live in an area where heavy rain is common. They should also be cleaned out on a regular basis and be free of clogs of any kind. It might not be a fun home improvement activity for you or anyone you hire to do it for you, but doing this as opposed to having to repair water damage to your home will save you money in the long run.
The downspouts that are connected to your gutters are what direct the water from the gutters and down to the ground where a downspout extension should be located to make sure the water from your roof doesn’t collect around your foundation. These are normally located around the corners of the home, but can be found in other areas. The easier it is for water to get away from your home, the more money you’ll end up saving in the future.
End Mold’s Romance With Your Bathroom
When home buyers finally decide to purchase a new home, one of the first things they consider remodeling tends to be the bathroom. Bathroom remodeling isn’t always the easiest thing to do, especially if you are so unlucky as to find a colony of mold living in what is supposed to be one of the most comforting and relaxing areas of your home. Most people, however, wouldn’t know what to do if they found a mold colony in any part of their home, much less their beloved bathroom, even though this is one of the more likely places to find it.
The reason that the bathroom is one of the most common places to find infestations of mold is because there is a constant pattern of heat and humidity in this space. While some kinds of mold pose no threat to human beings, other kinds of mold can be hazardous to our health and can even render our homes uninhabitable. Black mold is found in many bathrooms and basements and it is very toxic. It has been known to cause rashes, fevers, flu-like symptoms and other health complications. If you discover what you think is black mold (and it truly does appear to be black), it’s best to call in a professional to get rid of it.
While it’s expensive to have the mold in your home removed, you will definitely want to put this on your to-do list. It can and will move to other parts of your home if it’s left unchecked. After the mold is removed successfully and you continue with your bathroom remodeling project, you’ll want to take steps to prevent the re-growth of mold in the future.
Install a bathroom fan while you’re remodeling if you don’t already have one. This is one of the best things that you can do to prevent mold from sneaking back into your quiet space. Bathroom fans get rid of the majority of the moisture that mold needs to grow and survive. Even if you’re not remodeling right now and your bathroom has no visible signs of mold, don’t bet on mold not invading there in the future, if you don’t have a fan in the bathroom, you should get one.
After showering or bathing, the shower curtain should be shaken off in the tub to direct as much water as possible toward the drain. Water that collects on the walls surrounding the tub should also be wiped either dry or down toward the drain with a squeegee. You want all the surfaces in your bathroom to dry out as quickly as possible.
The reason that the bathroom is one of the most common places to find infestations of mold is because there is a constant pattern of heat and humidity in this space. While some kinds of mold pose no threat to human beings, other kinds of mold can be hazardous to our health and can even render our homes uninhabitable. Black mold is found in many bathrooms and basements and it is very toxic. It has been known to cause rashes, fevers, flu-like symptoms and other health complications. If you discover what you think is black mold (and it truly does appear to be black), it’s best to call in a professional to get rid of it.
While it’s expensive to have the mold in your home removed, you will definitely want to put this on your to-do list. It can and will move to other parts of your home if it’s left unchecked. After the mold is removed successfully and you continue with your bathroom remodeling project, you’ll want to take steps to prevent the re-growth of mold in the future.
Install a bathroom fan while you’re remodeling if you don’t already have one. This is one of the best things that you can do to prevent mold from sneaking back into your quiet space. Bathroom fans get rid of the majority of the moisture that mold needs to grow and survive. Even if you’re not remodeling right now and your bathroom has no visible signs of mold, don’t bet on mold not invading there in the future, if you don’t have a fan in the bathroom, you should get one.
After showering or bathing, the shower curtain should be shaken off in the tub to direct as much water as possible toward the drain. Water that collects on the walls surrounding the tub should also be wiped either dry or down toward the drain with a squeegee. You want all the surfaces in your bathroom to dry out as quickly as possible.
Easy Ways to Stop the Mold Invasion
One of the most damaging things to a building, especially a residential one, is mold. While there are many kinds of mold and some are good and even used to make certain foods, when it grows inside your home it tends to lead to not only structural damage, but damage to the health of the people living in it as well. Home buyers are becoming more and more aware of the mold problem and wondering what they can do about it not only because of the health consequences of mold, but also of the damage it can do to the value of their home. Here are a few things you can do to help prevent mold from growing in your home.
Ventilating your household properly and in the right places is essential. Mold grows in warm, humid areas of your home that are not properly ventilated. It doesn’t need standing water to grow, only a humidity of over around 65% and if the humidity in the house is kept low enough, mold cannot grow. If you see condensation start to build up on a windowpane inside your house, this can be a sign that the humidity in your home is too high. Keep these areas wiped dry as much as possible until you can determine the best way to keep this from happening. Try a de-humidifier to help solve this problem.
Something else that helps with mold growth prevention is paperless sheetrock. This might be only feasible if you’re planning on building a completely new home, but if you’re doing any heavy remodeling or adding on any new space, paperless sheetrock is best because mold loves to feed on paper.
If you store papers and other items in your basement like cardboard boxes, don’t store them directly in contact with the floor, especially if there’s a chance that they could come into contact with moisture such as leaks around the indoor foundation or a leaky water heater. As stated before, mold eats paper and needs moisture to survive.
Clean up spills and any leaks you find in your home as quickly as possible and if you have a fan in your bathroom that can be used to let heat and steam outside the house, use it while showering. If you can vent the heat from items like clothes dryers and stoves to the outside of the house, do this while they are in use, as well.
Cold surfaces in the home such as pipes, especially in basements, should be insulated so condensation does not form. This not only prevents mold, but also helps to prevent the pipes from rusting.
With some smart actions, preventing mold from growing in your home isn’t just beneficial, it’s easy. The benefits of a mold free home definitely outweigh the cost of going to the small bit of trouble to keep it that way.
Ventilating your household properly and in the right places is essential. Mold grows in warm, humid areas of your home that are not properly ventilated. It doesn’t need standing water to grow, only a humidity of over around 65% and if the humidity in the house is kept low enough, mold cannot grow. If you see condensation start to build up on a windowpane inside your house, this can be a sign that the humidity in your home is too high. Keep these areas wiped dry as much as possible until you can determine the best way to keep this from happening. Try a de-humidifier to help solve this problem.
Something else that helps with mold growth prevention is paperless sheetrock. This might be only feasible if you’re planning on building a completely new home, but if you’re doing any heavy remodeling or adding on any new space, paperless sheetrock is best because mold loves to feed on paper.
If you store papers and other items in your basement like cardboard boxes, don’t store them directly in contact with the floor, especially if there’s a chance that they could come into contact with moisture such as leaks around the indoor foundation or a leaky water heater. As stated before, mold eats paper and needs moisture to survive.
Clean up spills and any leaks you find in your home as quickly as possible and if you have a fan in your bathroom that can be used to let heat and steam outside the house, use it while showering. If you can vent the heat from items like clothes dryers and stoves to the outside of the house, do this while they are in use, as well.
Cold surfaces in the home such as pipes, especially in basements, should be insulated so condensation does not form. This not only prevents mold, but also helps to prevent the pipes from rusting.
With some smart actions, preventing mold from growing in your home isn’t just beneficial, it’s easy. The benefits of a mold free home definitely outweigh the cost of going to the small bit of trouble to keep it that way.
Dealing With Water Damaged Documents
Marriage, birth, and death certificates are only a few of the hundreds of different important documents and items that we have in our homes that can become damaged by flood waters or other kinds of leaks and most of us don’t know how to safely deal with these items once the damage is already done.
The first thing that you should know is that there isn’t any reason to panic, unless you’ve been away from your home for more than two days. It takes two days for mold to begin to grow on these items, so one of the first things that you should do is make the environment unfriendly to mold. Keep the house around 65 degrees Fahrenheit if you can and reduce the humidity. If there is any standing water still in the house, remove it as quickly as possible. Be careful, however, of any electrical hazards that might still exist and make sure the electricity to the house is off before you go rushing into any soaked areas. The possibility of electrocution is very real if the power isn’t off.
Air circulation in the house should be increased with fans if the air outside isn’t warmer or more humid than the air inside. If there are any emergency repairs that need to be made inside the house to ensure your safety, do them immediately.
The next thing you should do is figure out what documents in your home are going to need to be salvaged. This will include the documents listed above, marriage, birth, and death certificates, along with any insurance papers, divorce papers, and almost any other legal documents you have on hand. If the materials are not completely soaked in water, it’s possible to just air dry them and they will be fine. If they’ve been submerged for long, the best bet is to have them frozen and freeze-dried by a local facility.
Buy some freezer wrap from your local grocery store if they have it and use it to separate documents and books from each other when you pack them into boxes. Remove the most important items (i.e. legal documents, antique books of any value) first and if there are any less important items that you want to save (high school diplomas, anything that’s “one-of-a-kind”, books), remove those second. Don’t pack anything tightly in the freezer paper, just tight enough to keep the items from sticking to each other or to the inside of the box. Label each box with its contents and your contact information and have them transferred to the nearest freeze dry facility.
The first thing that you should know is that there isn’t any reason to panic, unless you’ve been away from your home for more than two days. It takes two days for mold to begin to grow on these items, so one of the first things that you should do is make the environment unfriendly to mold. Keep the house around 65 degrees Fahrenheit if you can and reduce the humidity. If there is any standing water still in the house, remove it as quickly as possible. Be careful, however, of any electrical hazards that might still exist and make sure the electricity to the house is off before you go rushing into any soaked areas. The possibility of electrocution is very real if the power isn’t off.
Air circulation in the house should be increased with fans if the air outside isn’t warmer or more humid than the air inside. If there are any emergency repairs that need to be made inside the house to ensure your safety, do them immediately.
The next thing you should do is figure out what documents in your home are going to need to be salvaged. This will include the documents listed above, marriage, birth, and death certificates, along with any insurance papers, divorce papers, and almost any other legal documents you have on hand. If the materials are not completely soaked in water, it’s possible to just air dry them and they will be fine. If they’ve been submerged for long, the best bet is to have them frozen and freeze-dried by a local facility.
Buy some freezer wrap from your local grocery store if they have it and use it to separate documents and books from each other when you pack them into boxes. Remove the most important items (i.e. legal documents, antique books of any value) first and if there are any less important items that you want to save (high school diplomas, anything that’s “one-of-a-kind”, books), remove those second. Don’t pack anything tightly in the freezer paper, just tight enough to keep the items from sticking to each other or to the inside of the box. Label each box with its contents and your contact information and have them transferred to the nearest freeze dry facility.
A Few Quick Facts About Mold
Something that a lot of people don’t know about mold is that it is everywhere we are. It’s hard to escape mold entirely, because it’s in the air we breathe. It is a form of fungi that grows all around the world and there are countless species of it that can be almost any color you can think of. A lot of them are harmless, but the ones that aren’t, such as toxic black mold, are the ones that most people are concerned about growing in their homes. Along with being unsightly, it can cause many health complications, especially if someone living or working in the affected area is allergic to it.
How does it get into your building? It usually comes from outdoors, either due to water leaking into the house from outside or because the humidity in a home is too high. Areas with water damage such as roofs, flooded areas, crawl spaces, and plumbing leaks are often sites for mold infections.
Why should you worry about it? Aside from the health complications that some molds can cause, it has been known to grow on furniture, clothing stuffed into the backs of closets, and even children’s toys. All these items need to be cleaned thoroughly and sterilized before being used again, if they’re used again at all. Some items like clothing are easier to throw away than they are to clean. The structural damage that mold can cause to your home overtime can be substantial and as soon as you discover a mold infestation, it’s best to either call in a professional to get rid of it or, if it’s a smaller infection, remove the mold and clean the area yourself using the different testing and cleaning kits that are available on the market today.
Who should worry about mold the most? The people who are most affected by mold in their homes or places of business are infants and small children, the elderly, people with respiratory conditions such as asthma or emphysema, anyone with a weakened immune system, such as people with HIV or AIDS, chemotherapy patients, anyone who has just had surgery, and pregnant women.
How do you prevent mold? The easiest way to prevent mold is to make sure your home is a cool and dry environment. Bathrooms and kitchens should be paid special attention to. Clean up spills and leaking water quickly and do not allow standing water in any part of your home, even the basement, because the infestation can and will spread to other areas of your home. Do your best to direct heat and moisture from clothes dryers, dish washers, stoves, and bathrooms outside your home with the appropriate fans and vents.
How does it get into your building? It usually comes from outdoors, either due to water leaking into the house from outside or because the humidity in a home is too high. Areas with water damage such as roofs, flooded areas, crawl spaces, and plumbing leaks are often sites for mold infections.
Why should you worry about it? Aside from the health complications that some molds can cause, it has been known to grow on furniture, clothing stuffed into the backs of closets, and even children’s toys. All these items need to be cleaned thoroughly and sterilized before being used again, if they’re used again at all. Some items like clothing are easier to throw away than they are to clean. The structural damage that mold can cause to your home overtime can be substantial and as soon as you discover a mold infestation, it’s best to either call in a professional to get rid of it or, if it’s a smaller infection, remove the mold and clean the area yourself using the different testing and cleaning kits that are available on the market today.
Who should worry about mold the most? The people who are most affected by mold in their homes or places of business are infants and small children, the elderly, people with respiratory conditions such as asthma or emphysema, anyone with a weakened immune system, such as people with HIV or AIDS, chemotherapy patients, anyone who has just had surgery, and pregnant women.
How do you prevent mold? The easiest way to prevent mold is to make sure your home is a cool and dry environment. Bathrooms and kitchens should be paid special attention to. Clean up spills and leaking water quickly and do not allow standing water in any part of your home, even the basement, because the infestation can and will spread to other areas of your home. Do your best to direct heat and moisture from clothes dryers, dish washers, stoves, and bathrooms outside your home with the appropriate fans and vents.
Subscribe to:
Posts (Atom)
